Konica Minolta bizhub 751 User Manual

bizhub 751/601 (Version 2) 8-3
Application functions
8
8 Application functions
8.1 Inserting paper between OHP transparencies ("OHP Interleave"
function)
In order to prevent copies printed onto OHP transparencies from sticking together as a result of the heat that
is produced during copying, paper (interleaves) can be inserted between the transparencies.
The interleaf can be kept blank, or copied from the same original as the transparency.
0 No Finishing setting can be used.
1 Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original" on page 3-9.
– For details on loading OHP transparencies, refer to "Paper weight" on page 7-3 and "Loading paper
into the bypass tray" on page 2-55.
2 Load the OHP transparencies into the bypass tray, and load the interleaf paper into the desired paper
tray.
– Use interleaf paper with the same size as the OHP transparencies.
3 Select [Transparency] as the paper type for the bypass tray, and then touch [OK].
– For details on specifying the paper type settings, refer to "Specifying a paper type for bypass tray"
on page 7-19.

Konica Minolta bizhub 751 Specifications

General

Monthly Duty Cycle	300, 000 pages
Copy Resolution	600 x 600 dpi
Printing Technology	Laser
Duplex Printing	Standard
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Scanning Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Print Speed	75 ppm
Scan Speed	75 opm (originals per minute)
Connectivity	Ethernet, USB
Zoom Range	25% - 400%
Operating System Compatibility	Windows, Mac, Linux