Before making copies
2
C250 2-31
Before making copies Chapter 2
To scan during warm-up
1 Press the [Power] (auxiliary power) button.
The indicator on the [Start] key lights up in orange.
?
How is the machine turned on?
% For details on turning on the machine, refer to “To turn on the ma-
chine” on page 2-29.
2 Check that the message “Now warming up. Ready to scan.” appears
on the touch panel.
– After the warm-up message is displayed, the Basic screen appears.
The indicator on the [Start] key lights up in green.
3 Position the document to be copied.
?
How is the document positioned?
% For details on positioning the document to be copied, refer to
“Feeding the document” on page 3-7.
4 Specify any necessary copy settings.
5 Using the keypad, specify the desired number of copies.
?
How is the number of copies specified?
% For details on specifying the number of copies, refer to “General
copy operation” on page 3-2.
6 Press the [Start] key.
The document is scanned, and the job is added to the list of queued
jobs.
7 Check that the document has finished being scanned, and then posi-
tion the next document.
To Next Page
Loading...
Need help?
General
