Konica Minolta BIZHUB C250 User Manual

Application functions
8
C250 8-3
Application functions Chapter 8
To copy using the “OHP Interleave” function
0 The Finishing setting cannot be changed.
0 The number of copies is set to “1” and cannot be changed.
1 Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-7.
2 Load overhead projector transparencies into the bypass tray or the 1st
tray. Load the interleaf paper into the desired paper tray.
– Use interleaf paper with the same size as the overhead projector
transparencies, and load them in the v orientation.
3 Touch [OHP], and then touch [OK].
– If the overhead projector transparencies are loaded into the 1st
tray, touch [Paper], select the 1st tray, and then touch [Change Tray
Settings].
The Paper screen appears.
4 Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
– To cancel all settings for the Application functions, touch [Reset].
The Sheet/Cover/Chapter Insert screen appears.

Konica Minolta BIZHUB C250 Specifications

General

Print Speed	25 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	25 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Connectivity	Ethernet, USB
Paper Size	A4, A5, B5