Konica Minolta BIZHUB C250 User Manual

Basic copy operations
3
C250 3-83
Basic copy operations Chapter 3
To bind copies at the center (“Fold & Staple”): Finisher FS-514
0 When the “Fold & Staple” setting is selected, the following default set-
tings are automatically selected.
“1→2”, “Sort”, “Booklet”,
Auto display zoom ratio when a Booklet setting is selected (×0.647)
1 In the Basic screen, touch [Fold & Staple].
The Center Erase screen appears.
2 Specify the desired center binding and folding settings.
– To staple copies at the center in two places, touch [Center Staple].
– To fold copies in half, touch [Fold].
– To fold copies in half and staple them at the center in two places,
touch [Center Staple] and [Fold].
– To cancel the “Fold & Staple” setting, touch [OFF].
– To cancel changes to the settings, touch [Cancel].
3 Touch [OK].
The Basic screen appears again.

Konica Minolta BIZHUB C250 Specifications

General

Print Speed	25 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	25 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Connectivity	Ethernet, USB
Paper Size	A4, A5, B5