Konica Minolta BIZHUB C250 User Manual

Basic copy operations
3
C250 3-71
Basic copy operations Chapter 3
Separating copies by pages (“Group” setting)
0 The default setting is “Group”.
0 If “Offset” is selected while no finisher is installed, printed copies will be
fed out and sorted in an alternating crisscross pattern if the following
conditions are met.
0 8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.
0 Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray.
0 The “Auto Paper Select” setting is selected.
0 The “Auto Paper Select” setting is not selected when the “Mixed Original”
setting is selected.
0 If “Offset” is selected while a finisher is installed, printed copies are fed
out and stacked on top of each other with each set shifted to separate it.
1 In the Basic screen, touch [Finishing].
The Finishing screen appears.
2 Touch [Group].
– To separate each set of pages, touch [Offset].
– To specify the output tray, when the finisher FS-514 is installed,
touch the button for the desired tray under “Output Tray”.
3 Touch [OK].
The Basic screen appears again.

Konica Minolta BIZHUB C250 Specifications

General

Print Speed	25 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	25 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Connectivity	Ethernet, USB
Paper Size	A4, A5, B5