Konica Minolta BIZHUB C250 User Manual

12
Utility
12-66 C250
Utility Chapter 12
2
Note
If the angle of the center folding position must be adjusted, contact your
technical representative.
2
Note
Enter the value by mm using the keypad.
Refer to the conversion rate below.
1 in. = 25.4 mm
Adjusting the center stapling position
The stapling position when printing with the “Center Staple” setting can be
adjusted for each paper size and for each paper type.
0 Adjust the center folding position before adjusting the center stapling po-
sition.
0 Before making any adjustments, use the “Fold & Staple” function to print
a single sample copy. Perform the adjustment while checking the sample
that was created.
1 Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
“Displaying the Administrator Setting screen” on page 12-47.
2 Touch [1 System Setting].
The System Setting screen appears.
3 Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4 Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.

Konica Minolta BIZHUB C250 Specifications

General

Print Speed	25 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	25 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Connectivity	Ethernet, USB
Paper Size	A4, A5, B5