Appendix
13
C250 13-5
Appendix Chapter 13
13.2 Glossary
The words used in Copy mode are described below.
Abbreviation
ADF
Automatic document feeder; Can be used to automatically scan the docu-
ment
A
AE Level Adjustment
Set this parameter to adjust the background of the document. The higher the
setting, the more that the document background is emphasized. (AE = Auto
exposure)
Adjust Color
Set these parameters to adjust the quality of color copies.
APS
“Auto Paper Select” setting
ATS
Automatic paper-tray-switching feature (ATS = Auto Tray Switch)
Auto Zoom
Select this setting to automatically select the appropriate zoom ratio after a
document is placed on the original glass or loaded into the ADF and the pa-
per size is selected.
Auto Paper Select
Select this setting to detect the document placed on the original glass or
loaded into the ADF, then automatically select paper of the same size if
“×1.0” is selected or select the paper size appropriate for the specified zoom
ratio.
B
Background Color
Set this function to copy the document using one of the 18 colors available
as the color of the background (blank areas).
Background Removal
Select a setting to adjust the density of the background color of the docu-
ment to one of nine levels.
Blue
Set this parameter to adjust the level of blue in the image, for example, if you
wish to emphasize the blue of water or the sky.
Brightness
Set this parameter to make the image either lighter or darker.
To Next Page
Loading...
Need help?
General
