Konica Minolta BIZHUB C250 User Manual

12
Utility
12-20 C250
Utility Chapter 12
Fax Basic Screen Default Setting
Copy Screen
Fax Active Screen
Copy Initial Screen Setting
Parameter Description
Default Tab Specify settings for faxing. For details, refer to the Facsimile Opera-
tions and the Network Facsimile Operations of the User’s Guide.
Default Program
Address Book Default In-
dex
Address Type Symbol
Display
No. of Characters for
Dest. Display
Parameter Description Default Setting
Copy Operating Screen Select the screen that is displayed while
printing.
•ON:
A copy job can be reserved by touch-
ing [Program Next Job] in the screen
with the message “Now printing.”,
which appears during printing.
• OFF:
A copy job can be reserved while the
Basic screen in Copy mode is dis-
played.
OFF
Parameter Description
TX Display Specify settings for faxing. For details, refer to the Facsimile Opera-
tions and the Network Facsimile Operations of the User’s Guide.
RX Display
Description Default Setting
Specify the default display for the Basic screen in Copy mode.
•TYPE1:
Buttons for selecting functions and the current settings are dis-
played in the Basic screen.
•TYPE2:
Some buttons for selecting functions are displayed in the Basic
screen, and the current settings are highlighted.
TYPE1

Konica Minolta BIZHUB C250 Specifications

General

Print Speed	25 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	25 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Connectivity	Ethernet, USB
Paper Size	A4, A5, B5