Konica Minolta BIZHUB C250 User Manual

Basic copy operations
3
C250 3-67
Basic copy operations Chapter 3
3.12 Selecting finishing settings
Various settings are available for sorting and finishing copies when they are
fed into the copy exit tray.
2
Note
The factory default setting is “Group”.
!
Detail
If no finisher is installed and the following conditions are met, printed
copies can be fed out and sorted in an alternating crisscross pattern.
8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.
Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray.
The “Auto Paper Select” setting is selected.
The “Auto Paper Select” setting is not selected when the “Mixed Original”
setting is selected.
2
Note
From Administrator mode, the machine can be set so that copies are fed
out without being shifted when the finisher FS-514 is installed. As a fac-
tory default, “Offset by Each Job Setting” is set to “ON”. For details on
specifying the setting for offset feeding when the finisher FS-514 is in-
stalled, refer to “System setting” on page 12-27.

Konica Minolta BIZHUB C250 Specifications

General

Print Speed	25 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	25 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Connectivity	Ethernet, USB
Paper Size	A4, A5, B5