Basic copy operations
3
C250 3-15
Basic copy operations Chapter 3
Scanning a multi-page document from the original glass
When making double-sided or combined copies using the original glass,
place each page of a multi-page document on the original glass to scan it.
The following procedure describes how to place single-sided document
pages on the original glass to make double-sided copies.
0 Either “Auto Print” or “Batch Print” can be selected as the print setting
when scanning with the “Separate Scan” setting. The default setting is
“Auto Print”. For details on selecting the print setting for scanning with
the “Separate Scan” setting, refer to “Copier setting” on page 12-22.
1 Lift open the original cover, or the ADF if it is installed.
2 Position the first page or the first side of the document face down onto
the original glass.
– For details on positioning the document, refer to “To place the doc-
ument on the original glass” on page 3-9.
3 Close the original cover, or the ADF if it is installed.
4 In the Basic screen, touch [Simplex/Duplex].
The Simplex/Duplex screen appears.
When loaded in the
v orientation:
When loaded in the
w orientation:
20°
20°
To Next Page
Loading...
Need help?
General
