To Next Page

To Previous Page

Basic copy operations

C252 3-75

Basic copy operations Chapter 3

To bind copies with staples

1 In the Basic screen, touch [Finishing].

The Finishing screen appears.

2 Under “Staple”, touch either [Corner] or [2 Position].

– To cancel the Staple settings, touch [Corner] or [2 Position] again to

deselect it. [2 Position] is available only if finisher FS-514 or finisher

FS-603 is installed.

– To cancel changes to the settings, touch [Cancel].

– To specify the output tray, touch the button for desired tray under

“Output Tray”.

3 Touch [Position], and then touch the button for the desired position.

Energy Star2
- What Is an ENERGY STAR ® Product2
Trademarks and Registered Trademarks3
- Table of Contents6
Available Features19
- Selecting the Print Color19
- Automatically Selecting the Paper19
- Adjusting Copies to the Size of the Paper19
- Specifying Separate Horizontal and Vertical Zoom Ratios19
- Scanning the Document in Separate Batches19
- Center Binding20
- Sorting Copies20
- Stapling Copies20
- Punching Holes in Copies20
- Copying Multiple Document Pages Onto a Single Page21
- Adjusting Copies According to the Image Quality of the Original21
- Inserting Paper between Copies of Overhead Projector Transparencies21
- Adding a Cover Page22
- Inserting Different Paper into Copies22
- Inserting Pages from a Different Document at Specified22
- Printing Double-Sided Copies with the Specified Page on the Front Side23
- Copying with Reversed Colors23
- Copying with a Background Color24
- Improving the Copy Color Quality24
- Creating Booklets from Copies of Pamphlets24
- Repeating Copy Images25
- Printing the Enlarged Image on Multiple Pages25
- Making Copies for Filing25
- Copying with the Page Layout of a Magazine26
- Erasing Sections of Copies26
- Adjusting the Image to Fit the Paper Size26
- Printing Distribution Numbers or Copy Protection Text on27
- Checking the Copy Settings27
- Enlarging the Size of Text in Touch Panel Screens27
- Displaying Explanations of Functions and Settings27
- Interrupting a Copy Job28
- Printing a Sample Copy28
Adjust Color Parameters29
General Information about Color31
Relationship between Hue, Brightness and Saturation (Color Model32
- Red" Parameter33
- Green" Parameter34
- Blue" Parameter35
- Color Balance" Parameter (CMYK Color Adjustment36
- Brightness" Parameter38
- Contrast" Parameter39
- Saturation" Parameter40
- Sharpness" Parameter41
- Hue" Parameter42
- Copy Density" Parameter43
- Single Color" Function44
- Color" Function45
- Background Color" Function46
- Neg-/Pos. Reverse" Function47
Explanation of Manual Conventions49
Descriptions and Symbols for Documents and Paper51
- Width" and "Length51
  - Paper Orientation51
User's Guides53
- User's Guide [Copy Operations] <This Manual53
- User's Guide [Network Scanner Operations53
- User's Guide [Box Operations53
- User's Guide [Enlarge Display Operations53
- User's Guide [FK-502 Facsimile Operations53
- User's Guide [Network Facsimile Operations53
- User's Guide [Print Operations54
  - Quick Guide [Print Operations54
  - Legal Restrictions on Copying55
1 Installation and Operation Precautions56
- Safety Information57
  - Warning and Precaution Symbols57
  - Meaning of Symbols57
- Regulation Notices64
- Caution Notations and Labels71
- Space Requirements72
- Operation Precautions73
2 Before Making Copies74
- Part Names and Their Functions75
- Adjusting the Angle of the Control Panel100
  - To Adjust the Angle of the Control Panel100
- Turning on the Main Power and the Auxiliary Power102
- Loading Paper into the 1St Tray120
  - To Load Paper (1St Tray)120
- Loading Paper into the 2Nd, 3Rd or 4Th Tray126
  - To Load Paper (2Nd, 3Rd or 4Th Tray)126
- Loading Paper into the LCT128
  - To Load Paper (LCT)128
- Loading Paper into the Bypass Tray131
  - To Load Paper (Bypass Tray)131
3 Basic Copy Operations138
- General Copy Operation139
  - To Make a Copy139
- Copies141
- Operations that Cannot be Combined142
  - Operations Where the Setting Specified Last Is Given Priority142
  - Operations Where the Setting Specified First Is Given Priority143
- Feeding the Document144
- Specifying Original Settings157
- Copying Documents of Mixed Sizes ("Mixed Original" Setting)157
- Copying Thick Documents ("Thick Original" Setting)159
- Selecting a Color Setting169
  - To Select a Color Setting170
- Selecting a Paper Setting172
  - Automatically Selecting the Paper Size ("Auto Paper Select" Setting)172
  - Manually Selecting the Desired Paper Size174
- Specifying a Zoom Setting175
- Automatically Selecting the Zoom Ratio ("Auto Zoom" Setting)175
- Selecting the Document and Copy Type Settings (Simplex/Duplex Settings)186
  - To Select Single-Sided Copies188
  - To Select Double-Sided Copies190
- Selecting the Quality of the Document192
  - Loading Documents with Small Print or Photos (Original Type Settings)192
  - To Specify an Original Type Setting193
- Specifying the Density Settings196
4 Additional Copy Operations226
- Checking the Copy Settings (Mode Check)227
  - To Check the Settings227
  - To Change the Settings229
- Printing a Proof Copy to be Checked (Proof Copy)230
  - To Make Test Prints230
- Interrupting a Copy Job (Interrupt Mode)233
  - To Interrupt a Copy Job233
- Registering Copy Programs (Mode Memory)235
  - To Store a Copy Program235
  - To Delete a Copy Program238
- Copying with Programmed Copy Settings (Mode Memory)239
  - To Recall a Stored Job239
- Displaying Function Descriptions (Help)242
- Specifying Control Panel Settings (Accessibility Mode)248
5 Troubleshooting266
- When the Message "Malfunction Detected." Appears (Call Technical Representative)267
  - To Call the Technical Representative268
- When the Message "Misfeed Detected." Appears270
- When the Message "Replenish Paper." Appears314
  - To Replenish Paper314
- When the Message315
  - Memory Becomes Full While Scanning315
  - Memory Becomes Full While Queuing a Job316
- When "Please Replace Following Unit(S)." Appears317
- When the Message "Need to Replace XXXX." Appears318
- Simple Troubleshooting320
- Main Messages and Their Remedies324
6 Specifications328
- Specifications328
7 Copy Paper/Original Documents342
- Copy Paper343
- Selecting the Paper Settings350
- Original Documents366
  - Documents that Can be Loaded into the ADF366
8 Application Functions370
- Inserting Paper between Overhead Projector Transparencies ("OHP Interleave" Function)371
- To Copy Using the "OHP Interleave" Function372
- Adding Cover Pages ("Cover Mode" Function)374
- To Copy Using the "Cover Mode" Function375
- Inserting Different Paper into Copies ("Insert Sheet" Function)377
- To Copy Using the "Insert Sheet" Function378
- Inserting Copies of a Different Document for a Specified Page ("Insert Image" Function)381
- To Copy Using the "Insert Image" Function381
- Specifying Pages to be Printed on the Front Side ("Chapters" Function)385
- To Copy Using the "Chapters" Function386
- Scanning Documents with Different Settings and Printing Copies All Together ("Program Job" Function)388
- To Copy Using the "Program Job" Function389
- Producing Separate Copies of each Page in a393
- To Copy Using the "Book Copy" Function394
- Copying Pamphlets ("Booklet Original" Function)398
- To Copy Using the "Booklet Original" Function399
- Tiling Copy Images ("Image Repeat" Function)402
- To Copy Using the "Image Repeat" Function403
- Copying an Enlarged Image on Multiple Pages ("Poster Mode" Function)407
- To Copy Using the "Poster Mode" Function407
- Copying with the Page Layout of a Magazine ("Booklet" Function)412
- To Copy Using the "Booklet" Function413
- Copying with Image Colors Inversed ("Neg-/Pos. Reverse" Function)414
- To Copy Using the "Neg-/Pos. Reverse" Function415
- Copying in a Mirror Image ("Mirror Image" Function)416
- To Copy Using the "Mirror Image" Function416
- Adding a Background Color to Copies ("Background Color" Function)420
- To Copy Using the "Background Color" Function420
- Adjusting the Copy Color Quality (Adjust Color Parameters)422
  - To Adjust the Adjust Color Parameters423
  - Checking the Print Result of the Adjust Color Settings (Sample Copy)425
  - To Make Sample Copies426
- Adding Filing Margins to Copies ("Page Margin" Function)427
- To Copy Using the "Page Margin" Function428
- Erasing Specified Areas of Copies ("Erase" Function)430
- To Copy Using the "Erase" Function430
- Adjusting the Image to Fit the Paper (Image Adjustment Settings)432
  - To Copy Using the Image Adjustment Settings433
- Printing the Date/Time, Page Number or Distribution Number on Copies (Stamp Functions)436
- Printing the Date/Time ("Date/Time" Function)437
- To Copy Using the "Date/Time" Function437
- Printing the Page Number ("Page #" Function)440
- To Copy Using the "Page #" Function440
- Printing the Distribution Number ("Set Numbering" Function)444
- To Copy Using the "Set Numbering" Function444
- Printing Copy Protection Text ("Copy Protect" Function)446
- To Copy Using the "Copy Protect" Function446
9 Replacing Toner Cartridges and Staples and Emptying Waste Containers454
- Replacing the Toner Cartridge455
  - To Replace the Toner Cartridge459
- Replacing the Staples463
  - To Replace the Staple Cartridge in Saddle Stitcher466
- Clearing a Staple Jam477
  - To Clear Jammed Staples in the Saddle Stitcher484
  - To Clear Jammed Staples in Finisher FS-603490
- Emptying the Waste Containers496
- Replacing the Waste Toner Box501
  - To Replace the Waste Toner Box503
10 Care of the Machine506
- Cleaning507
- Viewing Counters (Meter Count)513
- When the Message "Preventive Maintenance Time." Appears515
- Managing Jobs516
11 Managing Jobs (Job List)516
- Overview of the Job List Screen517
- Performing Operations on Jobs521
12 Utility534
- Overview of Utility Mode Parameters535
  - List of Registration Information and Parameters535
- Selecting a Destination Register547
- Specifying User Settings550
- Specifying Administrator Settings560
- Overview of Weekly Timer Settings582
  - Requisite582
- Adjusting the Printer583
- Adjusting the Finisher (FS-514)591
- Adjusting the Finisher (FS-603)599
  - Adjusting the Center Stapling Position599
  - Adjusting the Center Folding Position602
- Adjusting the Color Registration605
  - Adjusting the Color Registration for Yellow, Magenta and Cyan605
- 12.10 Adjusting the Gradation Levels608
  - Requisite608
- 12.11 Authentication Method611
- 12.12 User Authentication Setting619
- 12.13 Account Track Setting631
- 12.14 Password Rules638
  - Conditions of the Password Rules638
- 12.15 Enhanced Security Settings640
- 12.16 Viewing the Status of the Consumables643
  - Displaying the Unit Life Indicator Screen643
13 Appendix646
- Entering Text647
  - To Type Text649
  - List of Available Characters649
- Glossary650
- Index655

Brand	Konica Minolta
Model	bizhub C525
Category	All in One Printer
Language	English

Konica Minolta bizhub C525 User Manual

Table of Contents

Other manuals for Konica Minolta bizhub C525

Questions and Answers:

Konica Minolta bizhub C525 Specifications

Related product manuals