8
Application functions
8-56 C252
Application functions Chapter 8
Checking the Print Result of the Adjust Color Settings (Sample Copy)
You can make a sample copy of your document to see how it will appear with
the currently specified color adjustment settings.
As an example, the procedure for the Brightness parameter is described be-
low.
!
Detail
For details on displaying the screen for each Adjust Color parameter, re-
fer to “Adjusting the copy color quality (Adjust Color parameters)” on
page 8-53.
2
Note
[Sample Copy] does not appear in the Color Balance screen.
When the Sample Copy screen is displayed, no key other than [Reset] or
[Start] can be used.
Place the document on the original glass with the image to be checked
positioned within the sample area. The sample copy will be printed even
if the edges of the document extend off the original glass.
To Next Page
Loading...
Need help?
General
