Basic copy operations
3
C252 3-87
Basic copy operations Chapter 3
3.16 Deleting a stopped job
The following procedure describes how to delete a stopped job.
To delete a stopped job
0 For details on stopping a job being printed, refer to “Stopping scanning/
printing” on page 3-86.
0 Select only one job at a time to be deleted.
0 To continue the stopped job, press the [Start] key.
1 Press the [Stop] key
while a document is be-
ing scanned or a job is
being printed.
Scanning/printing stops.
The Stopped Jobs screen appears.
2 Select the job to be deleted, and then touch [Delete].
The selected job is deleted.
To Next Page
Loading...
Need help?
General
