8
Application functions
8-8 C252
Application functions Chapter 8
8.3 Inserting different paper into copies (“Insert Sheet”
function)
Different paper (such as colored paper) can be inserted for specified pages
in the copies.
There are settings (“Copy” and “Blank”) for selecting whether or not the in-
serted pages are printed. When the settings are combined with single-sided
copying or double-sided copying, the copies are printed as shown below.
If “Copy” is set, the document is copied as shown below when the specified
paper is inserted for the specified page.
When page 6 is specified
If “Blank” was set, the specified paper is inserted after the specified page.
When page 5 is specified
!
Detail
The specified paper can be inserted at a maximum of 15 locations within
a document of up to 999 pages.
In double-sided documents, one double-sided page is considered to be
two pages (one for the front and one for the back).
Double-sided copying is possible only if automatic duplex unit is in-
stalled.
Finishing Description
Single-sided copies The specified paper is inserted for the 6th page of the copy,
and the 6th page of the document is copied onto it.
Double-sided copies The back side of the 3rd page of the copy is left blank, the
specified paper is inserted for the 4th page of the copy, and
a double-sided copy of the 6th and 7th pages of the docu-
ment are printed onto it.
Finishing Description
Single-sided copies The specified paper is inserted as the 6th page of the copy.
Double-sided copies The back side of the 3rd page of the copy is left blank, and
the specified paper is inserted for the 4th page of the copy.
To Next Page
Loading...
Need help?
General
