8
Before Making Copies
8-22 bizhub PRO C6501
8.6 To Stop Scanning/Printing
This section describes how to stop the job currently in process (scanning,
printing, or both of scanning and printing).
To stop scanning/printing
0 This procedure is effective only for the job in progress. To stop reserved
jobs on standby, operate on the Job List Screen. See Section 14 for de-
tails.
1 Press [Stop] on the control panel
while the current job is in progress.
– With the popup menu displayed
right after pressing [Start] for
scanning the original of reserve
job, the current job cannot be
canceled even if [Stop] is
pressed. According to the proce-
dure on page 8-25, touch an ap-
propriate key on the popup menu
to clear it.
The current machine operation of the selected job will be suspended,
and the popup menu will be displayed on the Copy Screen.
2 Touch the desired key on the popup menu.
– The popup menu will vary according to the job in progress.
To Next Page
Loading...
Need help?
General
