Color Adjustment
10
bizhub PRO C6501 10-21
10.4 Changing Colors Using RGB Values
Change the color by modifying each value of red (R), green (G), and blue (B).
2
Note
In Full Color mode, this adjustment properly reflects on the strength of
each color (red, green, and blue) reproduced on a printed image.
Using Black or Single Color mode, this adjustment will operate to the re-
producibility of each color of colored original, giving effect to the strength
of black or single color on a printed image.
!
Detail
To reproduce the yellow part of the original which cannot be printed nor-
mally in Single Color mode, make the Red stronger.
To change the hue of the printed image in Single Color mode, see
"Changing Colors Using CMYK Value" on page 10-41.
To modify RGB value
1 Position the original.
2 Touch [Quality Adjust.] on the Copy Screen.
The Quality Adjustment Screen will be displayed.
To Next Page
Loading...
Need help?
General
