Basic Job Settings
9
bizhub PRO C6501 9-39
9.6 Paper Setting
Each paper tray has been preset with paper size and other specifications.
The setting items are as follows:
- Paper Type
- Name
- Weight
- Both Sides Adjustment
- Speed Setting
- Hole-Punch
- Colored Paper
- Air Assist (Tray 4 and 5 of Paper Feeder Unit PF-602 only)
Paper size
The machine can be set to detect the standard paper size when loaded or to
accommodate a specific size (custom size or tabbed paper size).
The tray specified as Standard or Tab Paper allows Auto Paper Select, Auto
Zoom, and Rotation to function.
The tray specified as Custom cannot be used when these functions are ac-
tivated.
Paper specifications
Using [Paper Setting] on the Copy Screen or Machine Status Screen, paper
specifications preset for each tray can temporarily be altered, new specifica-
tions can be registered, and registered specifications can be recalled.
The following describes how to use Auto Paper Select, Auto Zoom, and Ro-
tation functions, and how to change/register the paper size and other spec-
ifications for each tray as well as to recall registered specifications.
Improving unevenness on large-size paper or feedability of small-sized
thick paper in duplex printing
If printed image on large-sized paper shows unevenness, or small-sized
thick paper has difficulty in feeding when duplex-printed, adjust fixing pres-
sure of the fixing unit to make improvement on it.
!
Detail
The User Setting allows you to delete the registered paper specifications.
It also gives efficiency in registering more than one sort of specifications.
For details, see page 2-8 of POD Administrator’s reference.
To Next Page
Loading...
Need help?
General
