Output Applications
12
bizhub PRO C6501 12-33
12.6 Using Folder/Finisher/Stitcher Functions Manually
The following finishing functions are manually available with a set of paper
loaded in the upper tray of the post inserter of Folding Unit FD-503.
Folding Unit FD-503 only:
Z-Fold, Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate Fold, Half Fold, 2
Holes Punch, 3 Holes Punch
Folding Unit FD-503 + Finisher FS-521:
1 Stapling/ 2 Stapling in addition to the functions for folding unit only
Folding Unit FD-503 + Saddle Stitcher SD-506:
Fold & Staple in addition to the functions for folding unit only
Folding Unit FD-503 + Finisher FS-521 + Saddle Stitcher SD-506:
All functions are available.
!
Detail
For detailed specifications, see page 3-3 and page 7-7.
Prerequisites
0 When using folder/finisher/stitcher functions manually, paper should be
placed only in the upper tray of the post inserter.
0 Multi-feed detection is a feature that automatically stops the machine if
more than one sheet is fed at a time. The post inserter is designed to
Multi-Feed Detection
Function ON
Multi-Feed Detection
Function OFF
1 Stapling
2 Stapling
2 Holes Punch
3 Holes Punch
Z-Fold
Tri-
Fold-out
Tri-Fold-in
Double
Parallel
Half Fold
Gate Fold
Multi-Feed Detection button
Staple Selection button
Start/Stop button
Fold Selection button
Punch selection
button
Fold & Staple
To Next Page
Loading...
Need help?
General
