Output Applications
12
bizhub PRO C6501 12-43
To turn off the heater of the perfect binder
When the job using perfect binder is completed, the heater of the perfect
binder will automatically be turned off in one minute. The heater will also be
turned off automatically in one minute if any operation has not been made on
the perfect binder after completion of the warmup.
The heater can be turned off manually by touching [PB heater] on the
Machine Status Screen while warming up or ready for operation,
!
Detail
Service can set the heater not to be turned off automatically after one-
minute interval. Please contact your service representative, if desired. In
this case, the heater will not be turned off till the Auto Low Power/Auto
Shut-Off functions on the main body. Please be careful not to allow the
paste pellets to deteriorate.
2
Note
Touching [PB heater] will not function if any perfect binding jobs are
entered.
To Next Page
Loading...
Need help?
General
