bizhub 42/36 5-143
5.7 [Network] tab
5
5.7.16 [OpenAPI Settings]
Configure the settings for OpenAPI function.
Select [Network] ö [OpenAPI Settings] ö [OpenAPI Settings].
Item Description
[OpenAPI] Select whether or not OpenAPI is used.
[Port Number] Enter a port number.
The currently used port number cannot be specified.
[SSL/TLS] Select whether or not SSL/TLS is used.
You can configure this setting if device certificate(s) is registered in [Secu-
rity] ö [PKI Settings] ö [Device Certificate].
[Port Number (SSL/TLS)] Enter the port number to be used for SSL communication.
The currently used port number cannot be specified.
[Authentication] Select whether or not to perform OpenAPI authentication.
[Login Name] Enter the login name used with OpenAPI authentication (up to 8 charac-
ters, excluding symbols).
[Change Password] Select this check box to change the password.
[Password] Enter the password used with OpenAPI authentication (up to 8 characters,
excluding symbols).
To Next Page
Loading...
Need help?
General
