bizhub 42/36 7-13
7.1 Using authentication unit
7
Associating the user with card using authentication device
When a user and card ID have been registered using Data Administrator, the user must be associated with
the card in the Administrator Settings of the machine.
1 Use the Control Panel of this machine to display the Administrator Settings screen.
2 Press [Authentication Setting].
3 Press [Card Authentication].
4 Select a user to be registered, and press [OK].
% Press [All] to display all users. Press [Search] to extract target users with search characters.
5 Press [Edit].
% Press [Delete] to cancel the registration when IC card information is already registered.
6 Place the IC card on Working Table WT-510, and press [OK].
% This associates the user with the IC card and registers the IC card for the user.
To Next Page
Loading...
Need help?
General
