Restricting users of this machine (MFP authentication)
6
6-4 bizhub 42/36
6.1
6.1.1 [General Settings]
In the administrator mode of PageScope Web Connection, select [Security] ö [Authentication] ö [General
Settings].
(If you use PageScope Authentication Manager for authentication, this menu is not displayed.)
Reference
- If Enhanced Security Mode is enabled, you cannot select [Off] in [Authentication] ö [General Settings]
ö [User Authentication]. Also, you cannot allow the public user access.
6.1.2 [ID & Print Settings]
Configure settings to use or operate the ID & Print function.
For details, refer to page 5-31.
Reference
- For details on the ID & print function, refer to the [User's Guide Print Operations].
6.1.3 User Registration
Configure user registration settings.
For details, refer to page 5-23.
6.1.4 Account Track Registration
Configure account track registration settings.
For details, refer to page 5-25.
Item Description Prior check
[User Authentica-
tion]
Select [Device].
[Public Access] Select whether to allow the public user access.
If [Allow] is selected, the public user can use this machine
by selecting [Public User] in the login page to log in to the
machine.
If [Allow (without Login)] is selected, the public user can
use this machine without logging in to the machine in the
login page.
Do you permit the
public user access?
[Account Track] To enable account track, select [On].
To select [On], specify the authentication method first, and
then register accounts in [Account Track List].
Do you use the ac-
count track func-
tion?
[Account Track
Method]
To use the account track function, select its authentication
method.
This setting is required when you only use the account
track function.
[Synchronize User
Authentication &
Account Track]
To synchronize user authentication with account track and
manage users for each account track, select [Synchro-
nize].
Once you specify the account name of the user at user
registration, you will be able to log in by entering only the
user name. If you have omitted the account name, the
user must specify the account name when logging in for
the first time. The account name that the user specify at
the first login time will be registered as the account name
of the user.
Do you synchronize
user authentication
with account track?
[Number of
Counters As-
signed for Users]
Enter a number of user counters to be assigned if user au-
thentication and account track are enabled.
You can aggregate the counter by user or account track,
and assign up to 1,000 counters to users and account
tracks. For example, if the number of user counters to be
assigned is set to 950, you can register up to 50 account
tracks.
To Next Page
Loading...
Need help?
General
