5
Common Settings
5-2 Di1611/Di2011 Twain Driver
Paper Size:
Select the paper size from the pull-down list to match the size of document
to be scanned.
Scan Type:
The Scan Type pull-down list contain two options.
G B/W: Suitable for most text documents.
G Photo: Suitable for photographs.
Resolution:
The Resolution pull-down list contain three options that can be used for
different purposes.
G 150dpi × 150dpi: Normal resolution for text documents containing
standard sized text.
G 300dpi × 300dpi: Higher resolution for text documents containing small
characters or fine print, such as a newspaper article. This is default
setting.
G 600dpi × 600dpi: Highest resolution for scanning photographs and oth-
er images.
Duplex Scanning:
Select OFF or ON from the pull-down list.
Note
“Duplex Scanning” is not displayed and cannot be selected when the
Duplexing Document Feeder is not connected to the machine. (Di2011
only)
Brightness:
This function is used to adjust the brightness of colors. The default set-
tings is 0.
Brightness can be set from -4 to 4.
To Next Page
Loading...
Need help?
General
