Konica Minolta DI1611 - TWAIN DRIVER User Manual

Connecting to the USB Port
2
Di1611/Di2011 Twain Driver 2-1
2 Connecting to the USB Port

Important!
Be sure to use a shielded USB cable. Use of an unshielded cable may
result in radio interference.
1 Make sure that the copier and the computer to be connected to the
copier are turned OFF.
2 Connect one end of the USB cable to the USB port of the copier.
This completes the connection.

Note
USB1.1 is only supported on Windows 98, Windows Me, Windows
2000, and Windows XP.
Connect
Copier
PC

Konica Minolta DI1611 - TWAIN DRIVER Specifications

General

Brand	Konica Minolta
Model	DI1611 - TWAIN DRIVER
Category	Printer Accessories
Language	English