3
BEFORE YOU BEGIN
Before installing the DiMAGE Viewer software, read the data-transfer section in the camera manual.
This section details how to connect the camera to a computer using the supplied USB cable. The s in
this manual assume the camera is connected to the computer with a USB cable as described in the
camera manual.
This instruction manual does not provide instruction in the basic operation of the personal computers,
or the basic operation of Windows or Macintosh operating systems; refer to the manuals supplied
with the computer.
The examples in this manual use Windows software. The appearance of the screens may differ from
the examples when using Macintosh or other Windows operating systems.
Every precaution has been taken to ensure the accuracy of this material. Contact Konika Minolta if
you have any questions. Konika Minolta is not responsible for any loss or damage caused by the use
of this software.
This instruction manual may not be copied either in part or in its entirety without the prior permission
of Konika Minolta.
To Next Page
Loading...