KTD-N0882-I Page 65 On-board and Mating connectors
9 On-board - & mating connector types
The Mating connector(s) / Cable Kits(s) which are fitting the On-board connectors are listed in below table.
The highlighted cable kits are included in the “KTQ87 Cable & Driver Kit” PN 826602 / 0200000002.
(Different quantity of each cable kit included, depending on the quantity of onboard connectors).
Connector
Mating Connectors / Cables
SYS_FAN2
Mighty 21-013-00222-1 AMP 1375820-3 (3-pole)
7DBN4B2B8UW4
Kontron PN 821035 (cable)
SM-K-TR
Kontron KT 910000005
Technology inc
HB12-220-VFS-20 Kontron KT 821515 (cable)
Load default
CVILUX CH11032VA00 - -
(Cable)
* USB10/USB11 is located in FRONTPNL connector. Depending on application KT TBD cable kit can be used.
Note: In above table, more than one connector can be listed for each type of on-board connector, if they
all have same fit, form and function and are approved by Kontron as an alternative. Please notice that
standard connectors like DP, PCI, PCIe, miniPCIe, Audio Jack, Ethernet and USB are not included in the list.
To Next Page
Loading...
