Kontron KTH81/mITX - AMT Configuration

KTD-N0882-I Page 90 BIOS - Advanced
KTQ87/KTH81 Users Guide
AMT Configuration
Phoenix SecureCore Technology Setup
Advanced
AMT Configuration Item Specific Help
Intel ® AMT
Enter Intel ® MEBx Setup
Un-Configure ME
[Enabled]
[Disabled]
[Disabled]
Enable/Disable Intel ® Active
Management Technology BIOS
Extension.
Note: iAMT H/W is always enabled.
This option just controls the BIOS
extension execution.
If enabled this requires additional
firmware in the SPI device.
F1
Help
↑↓
Select Item
+/-
Change Values
F9
Setup Defaults
Esc
Exit
←→
Select Menu
Enter
Select ►Sub-Menu
F10
Save and Exit
Function
Selection
Description
Intel ® AMT
Disabled
Enabled
Enable/Disable Intel ® Active Management
Technology BIOS Extension.
Note: iAMT H/W is always enabled. This option
just controls the BIOS extension execution.
If enabled this requires additional firmware in
the SPI.
Enter Intel ® MEBx Setup
Disabled
Enabled
Enter Intel ® MEBx Setup on the next boot.
Un-Configure ME
Disabled
Enabled
Un-configure ME without a password.