Kontron KTH81/mITX - LAN Configuration

KTD-N0882-I Page 84 BIOS - Advanced
KTQ87/KTH81 Users Guide
LAN Configuration
Note: The “+” and “-“ (to the right of the MAC address) indicates respectively if link is established or not.
Function
Selection
Description
ETH1 Configuration (Left)
Disabled
Enabled
With PXE boot
Control the Ethernet Devices and PXE boot.
Wake on LAN
Disabled
Enabled
Enable or disable integrated LAN to wake the
system. (The Wake On LAN cannot be disabled if
ME is on at Sx state).
ETH2 Configuration (Right)
Disabled
Enabled
With PXE boot
Control the Ethernet Devices and PXE boot.
Phoenix SecureCore Technology Setup
Advanced
LAN Configuration Item Specific Help
LAN Configuration
ETH1 Configuration (Left)
Wake on LAN
MAC Address & Link status :
ETH2 Configuration (Right)
MAC Address & Link status :
[Enabled]
[Enabled]
[00E0F42C4E01-]
[With PXE boot]
[00E0F42C4E02 -]
Control the Ethernet Devices and
PXE boot.
F1
Help
↑↓
Select Item
+/-
Change Values
F9
Setup Defaults
Esc
Exit
←→
Select Menu
Enter
Select ►Sub-Menu
F10
Save and Exit