Korg drumlogue - How to Make a Sound

15
How to make a sound
There are two ways to make sounds.
•
Select an existing drum kit that has a sound close to the one you want to create,
and then partially edit using that drum kit as the base to achieve the desired sound.
• Create your own sound from a drum kit in its initial state.
Sound creation is performed by changing the basic parameters (kit controls) and
detailed parameters (parameter knobs 1 to 4). Adjust the volume of each part using
the corresponding knobs in the mixer section.
If you press the LIVE buon to switch to Live mode, you can preview the tone of
each part by pressing buons 1 to 13. First, let's check what kind of sound is made
in Live mode.
We recommend that you save the edited drum kits and programs to this
instrument as soon as possible. Any edits that you make will be lost if you
turn o the power or recall a dierent program.
Saving a Program
EXPAND
SHRINKGROOVE
QUEUEQUEUE
GLOBAL
CLEAR ALLAUDIO IN CHOKE RAND.PART CLEAR PART COPY PARTSYNC POLY RAND.PART CLEAR PART
PATTERN
KIT MOTION
CLEAR ALLON/OFF CLEAR STEP CLEAR PART CLEAR ALL INIT
SP 2 ATTACK
DECAYSP 2
TUNESP 2
DETUNEHT
TUNEHT
DECAYHT
DRIVE
DECAY
SNAPPY
DECAY
CH DECAY
OH DECAY
TUNE
VOLUME
TUNE
DECAY
HYBRID DRUM MACHINE
drumlogue
1632
YES
NO
8 TRIP.
BD SD HT OH RS CP SP 1 SP 2 MULTICHLT
1 3RL/MONO
AUDIO OUT
DC 9V
TEMPO
PAGE
PROGRAM KIT
PATTERN EDIT
IN OUT TO DEVICETO HOST
BASS DRUM SNARE DRUM
HIGH HATS SAMPLE 1/2
TOMS
CLAP
2 4
AUDIO IN
IN OUT
ANALOG DIGITAL
MULTI
EFFECTS
1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16
MIDISYNC
ATTACKSP 1
DECAYSP 1
TUNESP 1
DETUNE
TUNE
DECAYLT
LT
LT
DELAY
BD SD HT CH RS CP SP 1 SP 2 VPM NOISE USER
REVERB MASTER
SHIFT
PART
OH
SELECT SAVE SELECT SAVE
LT
LIVE
MUTE
ACCENTLOOP STEP MOTIONCHAIN
TIME
>
<
><
2 2
1, 3
1.
When you press the PROGRAM SAVE buon, it enters the standby state to
save a program, and the PROGRAM SAVE buon blinks.
2.
Turn Parameter knob2&4, and select a program that you want to save.
3.
When you press the PROGRAM SAVE buon again, the drum kit will be
saved with the program.
TIP
Press the
<
(NO) buon to cancel.
To individually save a program and drum kit, turn o the global param-
eter “Save Kit with Program” seing ("OPERATIONS (Buon 1)" p.44).
Never turn o the power while Programs are being saved. Doing so may
destroy the internal data.
The program in the storage location is overwrien. Note that you cannot
cancel the operation.