Korg drumlogue - Effects Processing; Delay Effect Parameters and Types

38
Eects (DELAY, REVERB, MASTER)
This unit provides three eect sections in which DELAY and REVERB are placed
in an independent send bus, and MASTER is placed inline in the nal mix bus.
MASTER FX
DELAY
REVERB
SIDECHAIN
2
2
L/MONO, R, PHONES
PRE-MASTER MIX
2
DELAY SENDS
POST-MASTER MIX
2
REVERB SENDS
DLY2REV
PRE-MASTER MIX
POST-MASTER MIX
AUDIO IN/
ANALOG/
DIGITAL/
MULTI
DELAY
SOUND SELECT
SELECT [---, Stereo, Mono, Tape, Stereo BPM, Mono BPM, Tape BPM, ...*]
Select the type of delay eect.
Stereo: This is a stereo delay that allows you to set the left and right sound spreads
and the routing type.
Mono: This is a straight-type monaural delay.
Tape: Simulates a tape echo.
Stereo BPM: This is a stereo delay of which the delay time period is synchronized
with the TEMPO seing.
Mono BPM: This is a monaural delay of which the delay time period is synchro-
nized with the TEMPO seing.
Tape BPM: Tape echo of which the delay time period is synchronized with the
TEMPO seing.
* You can also add a delay eect created with the logue SDK (→ p.52 "Loading
user synth and effects").
PARAMETERS - For Stereo/Stereo BPM*
TIME [0.0%...100.0%]/[1/64, 1/48, ... 3/4, 1]
Adjusts the delay time.
* For Stereo BPM, set TIME as the relative value for the BPM value of the tempo.
FB (FEEDBACK) [0.0%...100.0%]
Adjusts the delay feedback amount.
SPREAD [L100%...L1%, C, R1%...R100%]
Adjusts the delay time period dierence between the left and right delay lines.
FILTER [---, LP, HP]
Select the lter type for feedback.