37
EG TIME [0%...100%]
Adjusts the EG time. The greater the value, the slower the change in EG.
PITCH EG [
-
100%...100%]
Adjusts the amount of EG applied to the pitch.
CUT. EG [
-
100%...100%]
Adjusts the amount of EG applied to the lter cuto.
LFO TYPE [Tri, Saw, Sqr, Trap, Peak, S&H, Random]
Select the LFO (Low Frequency Oscillator) waveform.
LFO FREQ [0%...100%]
Adjusts the LFO cycle.
PITCH LFO [
-
100%...100%]
Adjusts the amount of LFO applied to the pitch.
CUT. LFO [
-
100%...100%]
Adjusts the amount of LFO applied to the lter cuto.
MIX/ROUTE
PAN [L100%...L1%, C, R1%...R100%]
Adjusts the pan pot (left and right stereo localization).
SPREAD [<100%...<1%, 0, >1%...>100%]
Adjusts the spread of sound (stereo feeling).
DELAY [0.0%...100.0%]
Adjusts the feed amount of the delay eect.
REVERB [0.0%...100.0%]
Adjusts the feed amount of the reverb eect.
MASTER [ON, BYPASS]
Sets the master eect to On or Bypass.
SIDECH (SIDECHAIN) [0.0%...100.0%]
Adjusts the feed amount of the SIDECHAIN pass.
To Next Page
Loading...
