Korg drumlogue - Loop Mode

21
TIP
When you press the CHAIN buon, "Set Queue" is displayed, and you can
change the next program to be played.
Deleting a program from CHAIN
1.
Press the CHAIN buon to enter Chain mode.
2.
Hold down buons 1 to 16 corresponding to the order of CHAIN you want to
delete; the following screen appears.
3.
Press the
<
(YES) buon to execute deletion. To cancel deletion, press the
<
(NO) buon.
TIP
Hold down the CHAIN buon to delete all registered programs.
Deleting all the programs from CHAIN
1.
If you hold down the CHAIN buon in Chain mode, the following screen appears.
2.
Press the
<
(YES) buon to execute deletion. To cancel deletion, press the
<
(NO) buon.
Loop mode
During paern playback, you can specify the playback range in real time to loop,
or playback only the specied steps.