Korg drumlogue - Multi-Sound Source: VPM

33
MIX/ROUTE
PAN [L100%...L1%, C, R1%...R100%]
Adjusts the pan pot (left and right stereo localization).
SPREAD [<100%...<1%, 0, >1%...>100%]
Adjusts the spread of sound (stereo feeling).
DELAY [0.0%...100.0%]
Adjusts the feed amount of the delay eect.
REVERB [0.0%...100.0%]
Adjusts the feed amount of the reverb eect.
MASTER [ON, BYPASS]
Sets the master eect to On or Bypass.
SIDECH (SIDECHAIN) [0.0%...100.0%]
Adjusts the feed amount of the SIDECHAIN pass.
Multi-sound source parts (VPM, NOISE, USER)
VPM (Variable Phase Modulation)
SOUND SELECT
PRESET [Default, Oct., Half, Fourth, Air, Creep, Throat, Harsh]
Select the basic preset for the VPM sound source.
If you select a preset, seven parameters shown in the PARAMETERS page are
changed, excluding NOTE.
PARAMETERS
NOTE [C-1...G9]
Sets the sound pitch.
INDEX [0.0%...100.0%]
Adjusts how much phase modulation is applied.
RATIO [1/4, 1/2, 3/4, 1x, 2x...16x]
Adjusts the phase modulation frequency as a percentage of NOTE.
NOISE [0.0%...100.0%]
Adjusts the depth of noise modulation.