Korg drumlogue - Using the SHIFT Function; SHIFT Function Overview and Examples

23
Using the SHIFT function
You can access various SHIFT functions of this unit by pressing buons 1 to 16
while holding down the SHIFT buon. There are many useful features for editing
sequencer steps.
EXPANDSHRINKGROOVE
QUEUEQUEUE
GLOBAL
CLEAR ALLAUDIO IN CHOKE RAND.PART CLEAR PART COPY PARTSYNC POLY RAND.PART CLEAR PART
PATTERN
KIT MOTION
CLEAR ALLON/OFF CLEAR STEP CLEAR PART CLEAR ALL INIT
1632
YES NO
8 TRIP.
PATTERN EDIT
ANALOG DIGITAL
MULTI
EFFECTS
1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16
DELAY
BD S D HT CH RS C P SP 1 SP 2 VPM NOISE USER
REVERB MASTER
SHIFT
OHLT
LIVE ACCENTLOOP STEP MOTIONCHAIN
TIME
><
AUDIO IN CHOKE RAND.PART (KIT) CLEAR PART (KIT) CLEAR ALL (KIT) MOTION ON/OFF CLEAR STEP CLEAR PART (MOTION) CLEAR ALL (MOTION) SYNC POLY COPY PART RAND.PART (PATTERN)
CLEAR PART (PATTERN)
CLEAR ALL (PATTERN) INIT
Usage example
For example, here is how to clear the steps in the CH (closed hi-hat) part.
1.
First, select the part for which you want to use the SHIFT function. If you
press buon 5 while holding down the PART buon, the CH part is selected.
2.
While holding down the SHIFT buon, execute the SHIFT function assigned
to buons 1 to 16. If you press buon 14 while holding down the SHIFT but-
ton, "CLEAR PART" is executed, and CH disappears from the rhythm paern.
3.
If you press the same SHIFT function buon while holding down the SHIFT
buon again, you can undo the operation (return to the previous state).
AUDIO IN (Button 1)
Makes seings for the sound source connected to the AUDIO IN jack.
LEVEL [ - 48.0dB...6.0dB]
Adjusts the volume of the external sound source.
ROUTE (ROUTING) [NONE, DELAY, REVERB, MASTER, SIDECH, OUTPUT]
Sets the routing. You can output the sound from OUTPUT as it is, apply an eect,
or apply a ducking eect by routing to the SIDECHAIN input of the eect.
CHOKE (Button 2)
Sets the priority of the part to be played when multiple parts are triggered at the
same time. For example, if you do not play OH and CH at the same time, it makes a
sound similar to that of a real hi-hat. Select the part to be set using buons 1 to 13.