Korg drumlogue - Page 24

24
GROUP [OFF, 1...4]
Sets the group to apply the priority.
Each time you press buons 1 to 13, the part switches between OFF and 1.
PRIORITY [LOW, MID, HIGH]
Sets the priority of the part.
RAND.PART (KIT) (Button 3)
Sets the parameters of the current part (various parameters and SOUND SELECT
on the PARAMETERS page) with random values. If you press the buon several
times, the parameter is set with a dierent random value each time.
CLEAR PART (KIT) (Button 4)
Resets the tone of the current part. Press the buon again to undo the operation
(restores the parameter state that existed before reseing).
If you switch the target part before executing undo, you cannot undo.
CLEAR ALL (KIT) (Button 5)
Resets the tone of all parts. Press the buon again to undo the operation (restores
the parameter state that existed before reseing).
ON/OFF (Button 6)
Sets the motion sequence on or o.
CLEAR STEP (Button 7)
Resets the motion of the current part for each step. Press the buon again after re-
seing to undo the operation (restores the parameter state that existed before reset-
ting).
CLEAR PART (MOTION) (Button 8)
Resets all motions for the current part. Press the buon again after reseing to
undo the operation (restores the parameter state that existed before reseing).
If you switch the target part before executing undo, you cannot undo.
CLEAR ALL (MOTION) (Button 9)
Resets the motion set for all parts. Press the buon again after reseing to undo the
operation (restores the parameter state that existed before reseing).