Korg drumlogue - Page 25

25
SYNC (Button 10)
Returns the playback position of the current part to the rst step.
POLY (Button 11)
Makes each part independent without aligning the beginning of paern playback
with the longest paern part.
COPY PART (Button 12)
Copies and pastes the paern data. The paern data of the current part is copied,
and the LEDs of buons 1 to 13 of the pasted part blink. To paste the paern data,
press the buon of the part you want to paste.
RANDOM PART (PATTERN) (Button 13)
Randomly enter notes at each step of the current part.
CLEAR PART (PATTERN) (Button 14)
Resets all paern data for the current part.
Press the buon again to undo the operation (restores the parameter state that ex-
isted before reseing).
If you switch the target part before executing undo, you cannot undo.
CLEAR ALL (PATTERN) (Button 15)
Resets the paern data for all parts.
Press the buon again to undo the operation (restores the parameter state that ex-
isted before reseing).
INIT (Button 16)
Initializes all the current programs and drum kits. They are only initialized and not
saved. Save them as needed.
Press the buon again to undo the operation (restores the parameter state that ex-
isted before reseing).
If you switch the target part before executing undo, you cannot undo.