Korg Kronos - Playing Programs and Combinations

EnglishFrançaisDeutschEspañol
Playing sounds
En-17
Alsonoticethatthecommentsarea,abovetheSlot
buttons,updatestoshowthecontentsfortheselected
Slot.
Selecting outside the current group of 16
ToselectanewSlotoutsideofthecurrentgroupof16:
1. Usethenextandpreviousarrow‐buttonsatthe
bottomofthescreentobrowsethroughthegroups
of16.
Thelabelsfornext/previouswillvarydependingon
thecurrentgroupof16;forinstance,ifthecurrent
groupis0‐15,thebut
tonswillshow112
‐127and16‐31,
respectively.
Asyoubrowse,thecurrentselectiondoesnotchange
untilyouactuallypressoneofthe16buttons.
NOTE:IfyoubrowseoutsideofthecurrentSetList,
anyeditstotheSetListwillbelost.Besuretowrite
yo
ureditsfirst.
2. WhenyouseethedesiredSlot,presstheSlot’s
button.
Thebuttonbecomeshighlighted,andthecomments
andlargeSlotnumber/nameatthetopofthescreenare
updatedaccordingly.
Other ways to select Set Lists and Slots
YoucanalsoselectSetListsandSlotsusingthefront‐
panelInc/Decbuttons,theVALUEdial,orthenumeric
keypad,orstepthroughSlotsusingtheassignable
footswitch.Formoreinformation,see“Selectingand
playingsounds”inthe“SetLists”chapteroftheOG.
Choosing a sound for a Slot
1. PresstheEdittabtogototheSetListEditpage.
2. SelecttheSlotthatyou’dliketoedit.
Noticetheparameterswhichappearabovethe16Slot
buttons.TheseletyousetupthecurrentSlot.
3. Atthetopleftoftheparameterbox,selectthe
desiredType:Program,Combination,orSong.
EachSl
otcanplayeitheraProgram,aCombination,or
aSong.WhenyouchangetheType,theBank&
NumberandCategoryorTrackparameterswill
updateaccordingly.CategoryappearsforPrograms
andCombinations;TrackappearsforSongs.
4. UsingeithertheBank&NumberorCategory
popupmenus,selectthedesiredPro
gram,
Combination,orSong.
NotethatyoucanusethesamesoundinmultipleSlots
withinthesameSetList.Forinstance,youmighthave
afavoritepianosoundwhichyouuseinanumberof
differentsongs.YoucancreateanynumberofSlots
whichusethissamepianosound,eac
hwithdifferent
namesandcomments.
Writing your edits
Whenyou’vefinishedaddingsounds,makesureto
saveyoureditsbywritingtheSetList:
1. SelectWriteSetListfromthepagemenu.
TheWriteSetListdialogwillappear.
2. Ifyouwish,editthenamebypressingonthe“T”
texteditbutton.
3. Optionally,usetheSetListpopupmenutowrite
theSetListintoa
differentnumberinmemory.
4. PressOKtowritetheSetList,orCanceltoexit
withoutwriting.
FormoreinformationontheWritecommand,see
“Savingyouredits”onpage 24.
Adding items to the Set List from other
modes
Program,Combination,andSequencermodeseach
haveanAddtoSetListcommandintheirP0page
menus.
WhenyouusetheAddtoSetListcommand,the
currentProgram,Combination,orSongisinsertedat
thecurrentSlotofthecurrentSetList,similartousing
theSetListEditpage’
sInsertcommand.
Playing Programs and Combinations
Selecting Programs by bank and number
ProgramsarethebasicsoundsoftheKRONOS.
1. Pressthefront‐panelPROGbutton(theLEDwill
light)toenterProgrammode.
TheupperleftoftheLCDscreenshowsthenameof
thecurrentpage,PROGRAMP0:Play.Thisisagood
homebaseforplayingPrograms.
Noticethelarge,highlightedcharactersintheupper
partoftheLCDdi
splay.Thesearethenameand
numberofthecurrentProgram.Whentheseare
highlighted,youcanpressthe/ buttonstoselect
thenextorpreviouslynumberedProgram.
YoucanalsoturntheVALUEdialtomovethroughthe
Programsinlargersteps,orenterProgramnu
mbers
di
rectlyfromthenumerickeypad.
2. UsetheBANKSELECTI‐A…GandU‐A…G
buttonstoselectProgramsfromotherbanks.
ToselectbanksUSER–AA…GG,pressandholdapair
ofIandUBANKbuttonstogether.Forexample,to
selectbankUSER–CC,pressandholdtheI–Cbut
ton,
andthenpresstheU–Cbutton.
PresstheI‐Gswitchrepeatedlytocyclethroughbanks
GM,g(1)…g(9),andg(d).