Korg Kronos - Playing and editing Programs

EnglishFrançaisDeutschEspañol
Saving and loading data
En-27
Listening to the demo songs
Loading the demo songs
1. PresstheDISKbutton(theLEDwilllight)toenter
Diskmode.
2. Ifyou’veeditedorcreatedanynewsoundsor
songs,savethembeforeproceeding!
Loadingthedemosongswillreplacethecontentsof
theinternalmemory,includingPrograms,
Combinations,Songs,sampledata,andsoon.If
you’vemadeanyedits,sav
ethemtotheinternal
di
skoraUSBdrivebeforeyouproceed.
3. PresstheFiletabandthentheLoadtab,togoto
theLoadpage.
4. Makesurethat“DriveSelect”issetto
HDD:INTERNALHD.
Thecontentsoftheharddiskwillappear.
5. TouchtheFACTORYdirectorytoselectit.
6.
Pres
stheOpenbuttontoenterthedirectory.
7. TouchthePRELOAD.SNGfiletoselectit.
Thisfilecontainsthedemosong,alongwithallofthe
soundsthatitneeds.
8. PresstheLoadbuttontoopenthedialogbox.
9. Selectthe“LoadPRELOAD.PCGtoo”checkbox.
Withthisoptionchecked,thematching.PCGfilewill
belo
aded
alongwiththe.SNGfile.
10.Selectthe“LoadPRELOAD.KSCtoo”checkbox.
Withthisoptionchecked,thematching.KSCfilewill
beloadedaswell.
11.Set.SNGAllocationtoClear.
12.Set.KSCAllocationtoClearAll.
13.PresstheOKbuttontoloadthedata.
Playing the demo songs
1. PresstheSEQbutton(theLEDwilllight)toenter
Sequencermode.
Ifyouhaven’tdoneanythingwithSequencermode
sinceturningonthepower,theP0:Play/REC–MIDI
TrackProgSelect/Mixerpagewillappear.
Ifthispageisnotdisplayed,presstheEXITswitch
severaltimes.Althoughtheexactnumberwilldepend
onthepageyou
’ rein,pressingtheEXITswitchno
morethanthreetimeswillalwaysbringyoubackto
thispage.
Let’sstartbylisteningtosongS000.
2. VerifythatsongS000isselected.
Ifanothersongisselected,touchthesongnameto
highlightit.Thenpressthenumericke
y0,andthenthe
ENTERswitch.
3. PresstheSEQUENCERSTART/STOPswitch.
TheLEDwillblink,andthesongwillbeginplaying
back.
4. Ifyouwanttostopplaybackmid‐waythroughthe
song,presstheSTART/STOPswitchonceagain.
Let’slistentothenextsong.
5. Selectthesongnamebytouchingitonthedis
play.
6. Pressnumerickey1,andthenpresstheENTER
switch.
ThisselectsSongS001.
Alternatively,youcanpresstheSongSelectpopup(the
roundbuttonlocatedattheleftofthesongname),and
alistofsongnameswillappear.Selectasong,and
presstheOKbutton.
7. PresstheSEQUENCER
START/STOPswitchto
beginplayback.Tostopplayback,pressthesame
switchonceagain.
Drive SelectFile tab Load tabPRELOAD.SNG
Load tab