Overall settings for the KROSS, and saving/loading data
100
Data used by the KROSS
The KROSS accesses the following folders and files on the SD card.
1. DATA folder
This is the folder that the KROSS uses to save/load data. Use
the MEDIA> FILE page and UTILITY page to work with
these files.
You cannot create folders below the DATA folder.
Folders created by a computer or other device will be
ignored.
2. PCG files
These files contain KROSS programs, combinations, drum
kits, global settings (including favorites), and user arpeggio
pattern data. (The data whose check box is selected in the
Save dialog box will be saved.)
3. SNG files
These files contain song data for the Sequencer mode of the
KROSS.
4. MID files
These files contain Sequencer mode songs that have been
saved as Standard MIDI Files (SMF). Existing SMF data can
also be loaded.
5. Export WAVE files
These files contain audio recorder songs that have been
exported as WAVE files.
Files can be exported in the following format.
Export
File format: WAV file
File bit depth: 16-bit
Sampling frequency: 48 kHz
Number of characters in file name: The first eight characters
are shown
File name extension: .WAV
6. Import WAVE files
Existing WAVE files can be imported for use with the audio
recorder.
Files of the following format can be exported and imported.
Import
File format: WAV file
File bit depth: 16-bit
Sampling frequency: 44.1 kHz or 48 kHz, stereo files
Number of characters in file name: The first eight characters
are shown
File name extension: .WAV
Note: Since 44.1 kHz WAVE files will be converted into
48 kHz as they are imported into the KROSS, a small
amount of time may be required.
7. AUDIO folder
This folder contains system data and recording data for the
audio recorder.
Do not use your computer to modify this folder. The
files and folders below this folder are only for the use of
the audio recorder. Do not rename or modify them.
Doing so will prevent the system from operating
correctly.
1
2
3
4
5
6
7
AUDIO
KROSSKORG
EXTWAV01.WAV
EXTWAV02.WAV
DATA
NEWFILE.PCG
NEWFILE.SNG
(Programs, combinations, etc.)
(songs)
NEWFILE.MID
(Standard MIDI Files)
(Data folder)
(Export WAVE les)
IMPORT.WAV
(Import WAVE les)
Folder and le structure (DOS les)