NTS-3 kaoss pad kit - Connecting and getting ready to play
10
MIDI connectivity
The NTS-3 kaoss pad kit uses the USB port to send and receive MIDI signals.
Connect the USB port of the NTS-3 kaoss pad kit to your computer to exchange data with KORG KON-
TROL EDITOR, as well as to transmit and receive MIDI data.
For details on MIDI data that can be transmitted and received, see the MIDI implementation chart.
→ MIDI implementation chart
|
Using MIDI data via the USB port
1 Connect the USB Type-C port on the NTS-3 kaoss pad kit to the USB A port on your computer with
the included USB cable.
KORG USB-MIDI driver
The USB-MIDI driver that’s pre-installed on Windows does not allow the NTS-3 kaoss pad kit to be
accessed from multiple applications at the same time. If you want to use the NTS-3 kaoss pad kit with
multiple applications simultaneously, you must install the Korg USB-MIDI driver.
Even if you are not using this unit with multiple applications, we recommend installing the KORG USB-
MIDI driver, as it may offer improved operating stability.
Download the driver from the Korg website, and install the driver by following the accompanying doc-
umentation.
Note:
See the Korg website for the latest information on OS support.
https://www.korg.com/support/os/
Note:
When you first connect the NTS-3 kaoss pad kit to your computer, the USB-MIDI driver included with the
operating system is installed automatically.
|
Configuring the MIDI settings on the NTS-3 kaoss pad
kit
Configure the MIDI settings of the NTS-3 kaoss pad kit in the global parameters. → Global parameters
To Next Page
Loading...
