NTS-3 kaoss pad kit - Parameter edit
27
Global parameters
Use these parameters to configure the overall operations of the NTS-3 kaoss pad kit.
|
Making the settings
1 Turn on the power while holding down the EDIT button.
2 Use the knob to select the global parameter to edit.
3 Use the touch pad or FX DEPTH to edit the value. The current value is shown on the right side of
the display.
4 After you’re finished with the settings, press the FX4 button. This saves the settings and the NTS-
3 kaoss pad kit restarts.
Pressing the FX1 button during operations will make the NTS-3 kaoss pad kit restart (cancel) with-
out saving the settings you edited.
Turn the knob: Input Gain ( )
Touch pad or FX DEPTH: -85–0–9
Sets the input gain (the volume of the external input that’s connected to the AUDIO IN jack).
-85: -85 dB, -36: -36 dB, -24: -24 dB, -18: -18 dB, -12: -12 dB, -9: -9 dB, -6*: -6 dB, -3: -3 dB, -2: -2 dB, -1: -1
dB, 0: 0 dB, 1: +1 dB, 2: +2 dB, 3: +3 dB, 6: +6 dB, 9: +9 dB
Turn the knob: Monaural ( )
Touch pad or FX DEPTH: oFF, on
Sets whether to use the AUDIO IN in stereo or in monaural.
oFF*: stereo, on: monaural
Turn the knob: SYNC OUT Polarity ( )
Touch pad or FX DEPTH: hi, Low
Sets the polarity of the SYNC OUT jack.
hi*: Synchronizes at the peak of the waveform.
Low: Synchronizes at the trough of the waveform.
Turn the knob: SYNC IN Polarity ( )
Touch pad or FX DEPTH: hi, Low
Sets the polarity of the SYNC IN jack.
hi*: Synchronizes at the peak of the waveform.
Low: Synchronizes at the trough of the waveform.
Turn the knob: Tempo Range ( )
Touch pad or FX DEPTH: 0, 1
Sets the variable range for the tempo.
0*: narrow (56.0-240.0), 1: wide (10.0-600.0)
Turn the knob: MIDI Clock Source ( )
Touch pad or FX DEPTH: 0, 1
Sets the clock to which this unit is synchronized.
0: Internal. Synchronizes to the internal clock.
To Next Page
Loading...
