Korg Nu Tekt NTS-3 kaoss pad kit - | Curve types and polarities;

To Next Page

To Previous Page

NTS-3 kaoss pad kit - Parameter edit

Curve types and polarities

Editing module common parameters

1 Selects the module common parameter.

EDIT button + FX1–FX4 buttons (pressed twice): selects the module common parameters

Press one of the FX1 through FX4 buttons twice while holding down the EDIT button to select a mod-

ule common parameter.

2 Select the parameter to edit.

Turn the knob: selects a parameter

Press the knob: confirms the parameter and enters target selection

Turn the knob to select the parameter to edit. → Selecting the module common parameter and value

Press the knob to confirm.

3 Select the parameter target to edit, and set the value.

Korg Nu Tekt NTS-3 kaoss pad kit - | Curve types and polarities; | Editing module common parameters