Korg Pa300 - Dynamic Modulation Sources

283
Effects
Dynamic Modulation sources
Appendix
Dynamic Modulation sources
When the symbol is encoutered, a Dynamic Modulation
can be applied to the corresponding parameter. Dynamic Modu-
lation allows for realtime control of the effect. The following
table shows the available modulation sources.
Some notes on the Gate parameters follow.
Gate1, Gate1+Dmpr (Gate1+Damper)
The effect is at maximum during note-on, and will stop when all
keys are released. With Gate1 + Dmpr, the effect will remain at
maximum even after the keys are released, as long as the damper
(sustain) pedal is pressed.
Gate2, Gate2+Dmpr (Gate2+Damper)
This is essentially the same as for Gate 1 or Gate 1 + Dmpr. How-
ever when Gate 2 or Gate 2 + Dmpr are used as a dynamic mod-
ulation source for the EG, a trigger will occur at each note-on.
(In the case of Gate 1 and Gate 1 + Dmpr, the trigger occurs only
for the first note-on.)
Modulation source Note
Off No modulation
Gate1
Gate1+Dmpr
Gate2
Gate2+Dmpr
Note Nr Note Number
Velocity Note Velocity
Expo Velocity Exponential Note Velocity
AfterTouch After Touch
JS X Joystick Left/Right
JS+Y: CC#01 Joystick Forward
JS-Y: CC#02 Joystick Backward
MIDI(CC#04)
MIDI(CC#12)
MIDI(CC#13)
Ribb.(CC#16) Ribbon Controller
MIDI(CC#18)
MIDI(CC#17)
MIDI(CC#19)
MIDI(CC#20)
MIDI(CC#21)
MIDI(CC#17+)
MIDI(CC#19+)
MIDI(CC#20+)
MIDI(CC#21+)
Damper: #64
Prta.SW: #65 Portamento Switch
Sostenu: #66 Sostenuto Pedal
MIDI(CC#67)
MIDI(CC#80)
MIDI(CC#81)
MIDI(CC#82)
MIDI(CC#83)
MIDI(CC#85)
MIDI(CC#86)
MIDI(CC#87)
MIDI(CC#88)
Tempo
Modulation source Note

Gate1,Gate1+Dmpr
Gate1
Note
Dmpr
1
2
3
1
2
3
DamperPedal
Gate1+Dmpr
Time
On
Off

Gate2,Gate2+Dmpr
Gate2
Note
Dmpr
1
2
3
1
2
3
Damper Pedal
Gate2+Dmpr
Time
On
Off
Pa300 User Manual v150 (English).book Page 283 Saturday, March 29, 2014 5:29 PM