Korg Pa300 User Manual

40
Playing Sounds
Raising or lowering the Upper octave
Raising or lowering the Upper octave
If all Upper tracks sound too high or too low, you can quickly change which octave they are playing
in.
1 Use the UPPER OCTAVE buttons on the control panel, to transpose all Upper tracks at
the same time.
Note: The Octave Trans-
pose value for each of the
keyboard track is shown
under the Sound’s name.
2 Press both UPPER OCTAVE buttons together to reset the octave to the value saved in
the current Performance.
i
Each time you press this button, the
pitch will be lowered by one octave.
Each time you press this button, the
pitch will be raised by one octave.
Pa300 User Manual v150 (English).book Page 40 Saturday, March 29, 2014 5:29 PM

Korg Pa300 Specifications

General

Polyphony	128 voices
Sound Engine	EDS (Enhanced Definition Synthesis)
MIDI	Yes
Keyboard	61 keys (velocity sensitive)
Display	Color TFT LCD
Sequencer	16-track sequencer
Dimensions	1, 030 x 378.3 x 127 mm
Weight	8.35 kg
Effects Types	125 Effects types
Data Storage	USB
USB	USB to Host, USB to Device
Outputs	L/Mono, R, Headphones
Effects	125
Amplifier	2 x 13W