106
Sequencer operating mode
Song Select window
Delete Song
Select this command to delete the Song and create a new, blank
Song.
Delete Current Track
Select this command to delete the track currently selected in the
Track area (see “Track volume/status area” on page 88).
Solo Track
Select the track to be soloed, and check this item. You will hear
only the selected track, and the ‘Solo’ warning will flash on the
page header.
Uncheck this item to exit the Solo function.
Keep the SHIFT button pressed and touch one of the
tracks to solo it. Do the same on a soloed track to deactivate the
Solo function.
Copy/Paste FX
Use this command to copy a single effect, or both effects of an
FX group (A or B). See “Copy/Paste FX” on page 33 for detailed
instructions.
Exit from Record
Only available in Record mode. Select this command to exit the
Record mode, and go back to the Main page of the Sequencer
Play mode (see “Sequencer Play - Main page” on page 84).
Song Select window
This window appears when you select the “Load Song” com-
mand from the page menu, or press the SONG button in the
SELECTION sections on the control panel. See “Song Select
window” on page 9 for details.
Save Song window
The recorded Song is lost when turning the instrument off. The
Song is also lost when you overwrite it in Record mode, or if
you confirm the warning message when switching to the Style
Play or Song Play mode. You must save to a storage device any
Song you wish to preserve.
This window appears when you select the “Save Song” command
from the page menu.
Press EXIT to exit from this page and go back to the main page
of the Sequencer operating mode without saving the Song.
Song path
This line shows the path of the location where you are saving the
Song.
Directory
This is the list of the selected device’s content.
Detailed information about this type of page can be read in
“Song Select window” on page 9.
Storage device
Use this menu to select one of the available storage devices.
The actual name (label) of the device appears within square
brackets ([]).
Open
Opens the selected folder (item whose icon looks like this: ).
Close
Closes the current folder, returning to the parent (“upper”)
folder.
Device Type
DISK Internal memory
USB Device connected to the USB Host port
Song
path
Directory
Storage device
Type of the
file or folder
File status
File or folder
name
File size
Modification
date
To Next Page
Loading...
Need help?
General
