149
Global mode
MIDI: General Controls
Reference
Lower scale diagram
Pa600 Quarter Tone only: This diagram corresponds to the music
keyboard in the QUARTER TONE section of the control panel.
Use this scale to turn detuning on or off. Applied detuning will
depend on the programming set with the Upper scale diagram,
or recalled by selecting one of the SC Presets.
When a note is detuned, a black dot appears in the correspond-
ing note of the diagram.
MIDI: General Controls
This page allows you to select a MIDI Preset and set global
parameters for the MIDI communication.
MIDI Preset
Preset
MIDI channels can be automatically configured by selecting a
MIDI Preset. Each of them lets you automatically assign a value
to various MIDI parameters, to allow an easier connection with
a particular MIDI controller.
For detailed information about the preloaded MIDI Presets, see
“MIDI Preset” on page 239.
After selecting a MIDI Preset, you can apply any changes to each
channel’s settings. To store the changes in memory, select the
“Write Midi Preset” command in the page menu to save it to
memory (see “Write Midi Preset dialog box” on page 155).
Hint: In case you don’t have a “.SET” file containing the original
data, you can restore the original MIDI Presets by using the “Fac-
tory Restore” command (page “Utility” of the Media mode, see
page 170). War n in g : This procedure will erase all Factory and
User data from the internal memory.
General Controls
Use these parameters to set MIDI Clock and Local Off.
Clock Send
Use this parameter to turn the clock information on the MIDI
OUT or USB Device port on or off.
Note: This parameter is automatically deactivated each time you
turn the instrument on.
Off The Pa600 does not send the MIDI Clock signal.
You cannot slave another instrument to the
Pa600, even when connected to the MIDI OUT
or USB Device port.
On The Pa600 sends the MIDI Clock signal. You can
slave another instrument to the Pa600 Tempo,
Start/Stop and Play/Stop commands. Connect the
other instrument to the Pa600 MIDI OUT or
USB Device port.
To Next Page
Loading...
Need help?
General
