315
Installing the Korg USB MIDI Driver
Mac OS X: Installing the KORG USB-MIDI Driver
Appendix
6. When installation is completed, eject the virtual drive, and
connect the DEVICE USB port of your Pa600 to one of the
USB ports of your Mac by using a standard USB cable.
Driver’s ports
After installation, the following ports will be shown in you MIDI
application (e.g., sequencer) among the other MIDI devices:
Pa600 KEYBOARD: This allows for reception of MIDI messages
from Pa600 (keyboard and controller’s data) to the MIDI appli-
cation running on the Mac.
Pa600 SOUND: This allows for transmission of MIDI messages
from the MIDI application running on the Mac, to the internal
tone generator of Pa600.
To Next Page
Loading...
