Korg prologue - Page 48

48
Button 5 (MODULATION)
Conguresthemodulationseings.
LFO Target OSC [All, VCO1+2, VCO2, Multi]
This selects the oscillator that modulation will be applied to.
All: Modulation is applied to operators 1 and 2, as well as the MULTI ENGINE.
VCO1+2: Modulation is applied to operators 1 and 2.
VCO2: Modulation is applied to operator 2.
Multi: Modulation is applied to the MULTI ENGINE.
LFO Key Sync [O, On]
WiththeLFOKeySyncsettoOn,thephaseoftheLFOwillberesetwitheachnote-
on received from the keyboard.
LFO Voice Sync [O, On]
UsetheLFOVoiceSynctochoosewhetherthephaseoftheLFOwillbesynchro-
nized between voices.
EG Velocity [0..127]
SetsthestrengthoftheCutoEGIntusingvelocity.
Amp Velocity [0..127]
AmpVelocityisusedtospecifyhowmuchthevolumewillchangeaccordingtothe
keyboard velocity.
0:Thevelocitywillnotaectthevolume.
Thelargerthevalue,themoreeectthatkeyboardvelocitywillhaveonvolume.