40
5.17 The Performance Editor
In Performance mode, the Performance Ed allows
you
to edit
parameters
which have
been
assigned to
the
knobs.
When
you
use
the
Performance Editor to
modify
a
sound,
the
modified
values
will
be
transmitted
as exclusive
parameter
changes (refer to Parameter Guide, MIDI Implementation). (This
will occur only
if
the
page
GLB-15 parameter Transmit is ON.)
When these messages are received, the
same
performance
edit
will take place
on
the
other
Prophecy
that received the data. After editing, you can Write the
data
to save in internal
memory
or
RAM card.
These messages are transmitted
and
received
on
the MIDI Global channel.
Changes
in
the
sound
th<It
are
made
using
the Performance
Editor
knobs
are
transmitted
using
the
MIDI messages specified
1n
Edit mode Global section
page
GLB-5.
PEl-4
on/
off settings can be transmitted
and
received using MIDI NRPN messages. Use the following
MIDI messages.
PEl
ON
[Bn
63
00
Bn
62
06
Bn
06
7F]
OFF
[Bn
63
00
Bn
62
06
Bn
06
00]
PE2
ON
[Bn
63
00
Bn
62
07
Bn
06
7F]
OFF
[Bn
63
00
Bn
62
07
Bn
06
00]
PE3
ON
[Bn
63
00
Bn
62
08
Bn
06
7F]
OFF
[Bn
63
00
Bn
62
08
Bn
06
00]
PE4
ON
[Bn
63
00
Bn
62
09
Bn
06
7F]
OFF
[Bn
63
00
Bn
62
09
Bn
06
00]
5.18 Synchronizing the arpeggiator
In Performance mode, you
can
synchronize the playback of the
arpeggiator
with
an
external device.
Whether
the
Prophecy
is
the
master
(the controlling device)
or
the
slave
(the
controlled
device) is
determined by the setting of Edit mode Global section
page
GLB-8 [MIDI] Clock Source.
•
If
the Clock
Source
is set
to
INTERNAL, the
Prophecy
will
be
the
master,
and
the
speed
of
the
arpeggiator will be controlled by the dial
on
the front panel.
The arpeggiator playback will also be transmitted via MIDI, causing
an
external MIDI tone generator
to play the same notes,
or
controlling the tempo of an external MIDI sequencer.
•
If
the Clock Source is set to EXTERNAL, the Prophecy will be the slave,
and
the arpeggiator
speed
will be determined
by
incoming MIDI Clock messages.
Arpeggiator operations can be transmitted
and
received using MIDI messages.
Bank
Select (transmitted
and
received)
[Bn
63
00
Bn
62
01
Bn
06
nn] nn:00-09 (internal), OA-13 (card)
(The following four messages
are
received only.)
Arpeggiator
on/off
[Bn
63
00
Bn
62
02
Bn
06
nn] nn:00-3F (off), 40-7F (on)
Arpeggiator octave [Bn
63
00
Bn
62
03
Bn
06
nn] nn:00-03 (octave
1-4)
Arpeggiator latch [Bn 63
00
Bn
62
04
Bn
06
nn] nn:00-3F (off), 40-7F (on)
Arpeggiator key sync
[Bn
63
00
Bn
62
05
Bn
06
nn] nn:00-3F (off), 40-7F (on)
5.19
Arpeggiator
velocity and gate
The velocity
and
gate values
of
the arpeggiator can be controlled from a sequencer etc. using the MIDI
messages specified
by
Edit
mode
Global section
page
GLB-6.
To Next Page
Loading...
