Korg SQ-64

19
SQ-64 Owner's Manual
Global mode
Press the GLOBAL button to enter global mode.
You can change the pages by pressing the GLOBAL button repeatedly or 64 pads directly. Select the page containing a value that you
want to change, and adjust to a desired value using the PARAM1 - PARAM4 knob.
■
When no tracks are selected
Pad position Global parameter name PARAM knob Value (initial value is in boldface) Parameter details, remarks
A-5 CLOCK SOURCE
PARAM1 AUTO, INTERNAL, USB, MIDI
Set master sequencer clock source.
A-6 SYNC IN MODE
PARAM1
4PPQN, 12PPQN, 24PPQN, 48PPQN
Set the sync pulse rate.
PARAM2 ACTIVE HIGH, ACTIVE LOW
Set the sync pulse polarity.
A-7 SYNC OUT MODE
PARAM1
2PPQN, 4PPQN, 12PPQN, 24PPQN, 48PPQN
Set the sync pulse rate.
PARAM2 ACTIVE HIGH, ACTIVE LOW
Set the sync pulse polarity.
PARAM3 TRANSPORT OFF, TRANSPORT ON
The right channel of the sync connector will be set high when the sequencer is running and
low when stopped.
A-9 MIDI RX PROG. CHANGE
PARAM1 ANY, CH1 - CH16
Set channel on which MIDI program change messages will be received.
PARAM2 USB OFF, USB ON
Enable/disable reception of MIDI program change messages from USB-MIDI.
PARAM3 MIDI OFF, MIDI ON
Enable/disable reception of MIDI program change messages from MIDI input.
A-10 MIDI TX PROG. CHANGE
PARAM1 CH1 - CH16
Set channel on which MIDI program change messages will be transmitted.
PARAM2 USB OFF, USB ON
Enable/disable transmission of MIDI program change messages to USB-MIDI.
PARAM3 MIDI1 OFF, MIDI1 ON
Enable/disable transmission of MIDI program change messages to MIDI1 output.
PARAM4 MIDI2 OFF, MIDI2 ON
Enable/disable transmission of MIDI program change messages to MIDI2 output.
A-12 MOD DISPLAY
PARAM1 GATES, VALUES
Set which data should be displayed on steps.
A-13 KEYBOARD LAYOUT
PARAM1 KEYS, ISO, OCTAVE
Set keyboard layout for keyboard mode.
KEYBOARD BEHAVIOR
PARAM2 TRANSPOSE, OVERRIDE
Set the behavior for keyboard mode.
A-14 DISPLAY BRIGHTNESS
PARAM1 1..5..10
Sets the display brightness level.
A-15 AUTO-POWER OFF
PARAM1 DISABLE, ENABLE
Enable/disable auto power off feature.
B-9 MIDI RX TRANSPORT
PARAM2 USB OFF, USB ON
Enable/disable reception of MIDI transport messages via USB-MIDI.
PARAM3 MIDI OFF, MIDI ON
Enable/disable reception of MIDI transport messages via Legacy MIDI.
B-10 MIDI TX TRANSPORT
PARAM2 USB OFF, USB ON
Enable/disable transmission of MIDI transport messages to USB-MIDI.